3316R Firm Joint Outside Caliper 150mm (6in)
The Moore & Wright Firm Joint Outside Caliper are manufactur...
79A-12 Outside Calipers 300mm (12in)
Manufactured from a high-grade steel well finished and furni...
Mitutoyo 500-171-20 Digimatic Caliper 150mm/6in
Mitutoyo Digimatic Calipers 150mm/6in, 200mm/8in and 300mm/1...
56R Spring Joint Jenny Caliper 150mm (6in)
The Moore & Wright 56R Spring Joint Jenny Caliper is manufac...
79A-6 Outside Calipers 150mm (6in)
Combination Square 150mm (6in)
Multi-purpose combination square for use in both wood and metalworking applications Each square features a high quality cast and machined sliding stock fitted with a stainless steel rule engraved with both imperial and metric graduations a spirit level and marking scribe The Faithfull combination square has at least 10 different uses including-Measuring rule with metric and imperial scale 90° ins...
Mitutoyo 500-171-20 Digimatic Caliper 150mm/6in
Mitutoyo Digimatic Calipers 150mm/6in, 200mm/8in and 300mm/12in - Mitutoyo 500-171-20, This digimatic caliper 150mm/6in from Mitutoyo is a high quality digital caliper equipped with standard outside and inside jaws, making it ideal for quick, accurate internal and external measurements. Manufactured to a high standard and rich in features, the 500-171-20 has a built-in absolute measuring scale wit...
High Leverage Diagonal Cutting Plier 150mm (6in)
The IRWIN Vise-Grip High Leverage Diagonal Cutting Pliers are constructed of high-quality steel and are specially coated for superior rust-resistance and longer tool life The induction-hardened cutting edges are durable enough to cut ACSR nails screws and even piano wire without damaging the cutting edge They are fitted with industry-leading three-zone comfort grips that have been contoured for op...
Fast-Release Locking C Clamp 150mm (6in)
IRWIN Vise-Grip Fast-Release C-Clamp with regular tips and an easily controlled one-handed opening mechanism With increased finger room these clamps are ideal for tradesmen who prefer to work with gloves Holds up under extreme conditions such as welding and hammer strikes Easier controlled opening which is release is controlled and can be operated with one hand Easier to open from any angle by sim...
IP45 Water Resistant Digital Caliper 150mm (6in)
The Moore & Wright Water Resistant Series Digital Caliper are fitted with a patented ceramic capacitive sensor and a large LCD display that offers 4 way measurement mminch absoluteincremental measurement They can be zeroed at any point on the scale and is fitted with a conveniently located onoff switch The calipers are manufactured to DIN 862 standards and water and dust resistant to IP54 specific...
QCX 15 Quick Clamp Twin Pack 150mm (6in)
The Hultafors QCX 15 Quick Clamp is a compact one-hand clamp made of nylon reinforced fiberglass The design of this clamp has been focused on compact and slim operation The steel rail has been forged in one piece with a slim front jaw for increased access in tight places Pressure plates with tracked rubber pads to protect the surface and provide increased clamping force Supplied as a Twin Pack Spe...
Stanley 0-83-004 Trigger Clamp Large 150mm (6in)
Stanley Trigger Clamps - Stanley 0-83-004, Stanley trigger clamp quickly converts from a clamp to a spreader. It has a removable bar design which integrates longer or shorter bars, and the reinforced nylon and steel construction provides strength and durability.The removable jaw pads protect surfaces from marking and damage and the dual pivot trigger offers fast closing and a high clamping force o...
500 196-30 ABSOLUTE AOS Digimatic Caliper 0-150mm (6in)
The Mitutoyo 500 196-30 ABSOLUTE AOS is a digital caliper equipped with standard outside and inside jaws Hardened stainless steel construction and equipped with the latest electromagnetic ABSOLUTE AOS System scale for error free high-speed measurement It has a large and clear LCD readout and a ZEROABS button that allows the display to be Zero-Set at any slider position along the scale for comparis...
Manual Locking Clamp Swivel Pad 150mm (6in)
This CH Hanson clamp is built to last a lifetime It is made from high-grade alloy steel for maximum toughness and durability This clamp has a nickel-plated finish which resists rust and corrosion The clamp features a traditional release lever which allows the clamp to be released even at a high pressure The traditional adjustment screw allows the clamp to fit to various sizes and pressures The sha...
Stanley 9-83-123 FatMax Auto Trigger Clamp 150mm (6in)
Stanley-FatMax-Auto-Trigger-Clamps-Stanley-9-83-123-The-clamping-pressure-on-this-FatMax-auto-trigger-clamp-is-a-massive-200Kg-and-the-patent-pending-spring-closure-mechanism-offers-fast-closing-and-clamping-LI-The-clamp-quickly-converts-to-spreading-mode-without-the-use-of-tools-and-the-dual-pivot-trigger-delivers-fast-closing-and-easy-application-of-pressure-The-reinforced-nylon-and-steel-constr...
Mitutoyo 500-196-30 Absolute AOS Digimatic Caliper 150mm/6in
Mitutoyo-500-196-20-Digimatic-Caliper-150mm-6in-Mitutoyo-500-196-30-The-Mitutoyo-500-196-30-ABSOLUTE-AOS-is-a-digital-caliper-equipped-with-standard-outside-and-inside-jaws-Hardened-stainless-steel-construction-and-equipped-with-the-latest-electromagnetic-ABSOLUTE-AOS-System-scale-for-error-free-high-speed-measurement-P-P-P-It-has-a-large-and-clear-LCD-readout-and-a-ZERO-ABS-button-that-allows-the...
336-6R Firm Joint Jenny Caliper 150mm (6in)
The Moore & Wright Firm Joint Jenny Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint with no play The leg which holds the round adjustable hardened point is offset and model 341 has a locating spur on the straight leg The sizes listed are the effective leg length which is measured from the joint assembly...
QC 15 Quick Clamp Twin Pack 150mm (6in)
The Hultafors QC 15 Quick Clamp is a compact one-hand clamp made of nylon reinforced fiberglass The steel rail has been forged in one piece with a slim front jaw for increased access in tight places Pressure plates with tracked rubber pads to protect the surface and provide increased clamping force Designed with focus on compact and slim operation Supplied as a Twin Pack Specifcation Clamping Capa...
Xtreme Pressure Clamp 150mm (6in)
The IRWIN® Quick-Grip® Xtreme Pressure Clamps can be operated with a single hand and offer a clamping force of 250kg A tool-free Quick-Change function allows the jaws to be reversed to perform a spreading action Features longer length jaws with a unique swivelling action to keep constant pressure on uneven surfaces They also have a bar rest to allow you to place larger items in the clamping ja...
Stanley 0-20-556 FatMax Jab Saw 150mm (6in) 7TPI
Stanley-FatMax-Jab-Saw-Stanley-0-20-556-The-Stanley-FatMax-Hardened-and-tempered-blade-for-durability-and-long-life-Moulded-handle-combining-high-impact-plastic-and-soft-touch-inserts-for-improved-comfort-and-control-Large-smooth-end-pad-to-facilitate-pushing-and-twisting-blade-through-plasterboard-Sharp-point-for-piercing-board-Aggressive-triple-bevel-teeth-for-a-faster-cleaner-cut-LI-Blade-Lengt...
Stanley 0-35-400 64R Rustless Rule 150mm/6in
Stanley Rustless Metal Rules - Stanley 0-35-400, Buy Stanley 64R Rustless Rule 150mm/6in - an engineer's precision rules with both metric and imperial graduations. Incorporating the following features: rigid rustless steel material, 150mm measuring length, 16ths, 32nds, 64ths, 10ths, 20ths, 50ths, 100th imperial side graduation, 0.5mm metric side graduation, graduated on both sides and all 4 edges...
Vernier Caliper 150mm (6in)
The Faithfull Vernier Calipers are manufactured from hardened stainless steel with dual reading in Imperial to 0001in and in Metric to 002mm The universal four-way measurement facility enables reading in External Internal Depth and Step modes The sliding thumblock feature easily allows quick and precise measurements to be taken The satin finished scales and beam ensure fast easy and accurate readi...
Depth Gauge with Protractor 150mm (6in)
The Faithfull Depth Gauge is a versatile tool that allows the angle and depth to be measured simultaneously The protractor features deep etched graduations 0 - 180° in opposite directions permitting the reading of both the direct and supplementary angles The rule is graduated in both imperial and metric dimensions up to 150mm 6in and a knurled thumb nut allows the rule to be locked at the chosen ...
No.25 Fitters Vice 150mm (6in)
The Record IRWIN REC25 No25 Fitters Vice 150mm 6 inch is a medium-duty vice for industrial fitting and training workshops where work ranges from small fitting and filing work to the assembly and fitting of larger components The lever adjustment allows instant movement of the jaws through a half-nut mechanism working in conjunction with the threaded screw quick release The vice also has hardened st...
3316R Firm Joint Outside Caliper 150mm (6in)
The Moore & Wright Firm Joint Outside Caliper are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint with no play The sizes listed are the effective leg length which is measured from the joint assembly The Firm Joint Outside Calipers are manufactured to BS3123 standards Note Firm joint caliper capacities are generally ...
3306R Firm Joint Inside Caliper 150mm (6in)
The Moore & Wright Firm Joint Inside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint with no play The sizes listed are the effective leg length which is measured from the joint assembly The Firm Joint Inside Calipers are manufactured to BS3123 standards Note Firm joint caliper capacities are generally 1...