SNAP/DBG/9 Centring Guide 9/64in Drill

HSS Metal twist drill bit 4.2 mm Bosch 2608597233 Total length 55 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 5.2 mm Bosch 2608597243 Total length 62 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 7 mm Bosch 2608597253 Total length 74 mm rolled DIN 1897 Cylinder shank 5 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 3.5 mm Bosch 2608597225 Total length 52 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 3.3 mm Bosch 2608597223 Total length 49 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 4.9 mm Bosch 2608597240 Total length 62 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 3 mm Bosch 2608597219 Total length 46 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 5.6 mm Bosch 2608597247 Total length 66 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 3.8 mm Bosch 2608597229 Total length 55 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 2 mm Bosch 2609255063 Total length 49 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 4.7 mm Bosch 2608597238 Total length 58 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 4 mm Bosch 2608597231 Total length 55 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 5 mm Bosch 2608597241 Total length 62 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 4.1 mm Bosch 2608597232 Total length 55 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 5.9 mm Bosch 2608597250 Total length 66 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 4.5 mm Bosch 2608597236 Total length 58 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 2 mm Bosch 2608597209 Total length 38 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 8 mm Bosch 2608597255 Total length 79 mm rolled DIN 1897 Cylinder shank 5 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 4.8 mm Bosch 2608597239 Total length 62 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 5.1 mm Bosch 2608597242 Total length 62 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...

HSS Metal twist drill bit 5.3 mm Bosch 2608597244 Total length 66 mm rolled DIN 1897 Cylinder shank 10 pc(s)

Suitable for structural steel, alloyed metal and non-ferrous metal up to a tensile strength of 900 N/mm². For drilling in sheet metals and pipes with a thickness of 2 to 6 mm. For stationary use and especially suitable for hand-held drills. Exact drilling without pre-punching due to self-centring drill bit tip. Extra-short drill bits for confined spaces. Flute with an ideal working length for mos...